Concaver CVR2

Concaver CVR2

Platinum Black

from
£1,700.00
per set of 4
Found it cheaper elsewhere?
Call us on 01274 936040
Call us on 01274 936040

Concaver has a well-deserved reputation as one of the industry’s most innovative and forward-thinking brands. Although it’s only been around for little more than a decade, Concaver has firmly established itself as a force to be reckoned with. Think daring designs, standout finishes and aggressive sizes; Concaver wheels exist to make a statement.

Despite being inspired by OEM designs from high-end manufacturers like Lamborghini and Audi, Concaver alloy wheels immediately stand out from the competition. A hallmark of the brand is its signature high-gloss finishes which, combined with concave faces and intricate detailing, make Concaver wheels look truly distinctive. To top it all off, hybrid forged technology ensures that each and every wheel is lightweight and super strong. 

We’re proud to stock a wide range of Concaver alloy wheels here at LK Performance - and we’re here to help you find the perfect diameter, width and finish. To get started, head over to our vehicle fitting checker to see if your chosen wheel will fit your car. Alternatively, check out our comprehensive alloy wheel guide to brush up on your knowledge of wheel fitment and demystify terminology like offset, PCD and centre bore. 

Once you’re ready to buy, don’t forget that we offer Klarna as a payment method, allowing you to spread out the cost of your purchase by splitting it into three interest-free instalments. We include a complementary fitting kit with every wheel purchase, along with a range of fast and secure delivery options. Or, if you prefer, you can visit us at our showroom in Cleckheaton to pick out your wheels in person. We even offer fitting services to make your life a little easier!

EU Tyre Labelling: What does it all mean?

Tyre labelling for all passenger cars and light trucks has taken affect from 1 November 2012 under the European Regulation No: 1222/2009. This new regulation is intended to reduce the impact tyres have on the environment and the graphics used to represent the differences in tyres are similar to the ones used to review household appliances.

The labelling classifies three different areas of performance from A to G, however D is not going to be used as a classification to clearly differentiate between the top three grads A, B & C and the bottom three E, F & G.

Compare Fuel Economy

The energy lost when a tyre rolls is expressed as ‘rolling resistance’, and tyres with lower rolling resistances will use less energy which will increase your fuel economy. Tyres classified as ‘A’ are the more economical and have the least rolling resistance, and tyres classified as ‘G’ have the poorest full economy and the most rolling resistance.

If you fitted tyres that are classified as ‘A’ instead of ‘G’ you could save up to £110 or 80 litres of fuel for the life of the tyres (results can vary depending on the type of car or climate conditions)

Compare Wet Grip

The more grip a tyre gives you in wet weather conditions the safer the journey will be. Wheels always take longer to stop in wet conditions but tyres with a good web grip classification will have a shorter stopping distance than those with a ‘G’ classification.

The difference in breaking from 50mph across two grades is 3metres, meaning the difference between an ‘A’ classification and a ‘G’ classification is 18 metres.

Compare Noise Emissions

The final area tested is the exterior noise grading in decibels, with the decibel rating included alongside one to three black sound waves. One black wave is the quietest and three back sound waves are the noisiest. The introduction of noise emission tests is intended to encourage users to purchase quieter tyres which will help to reduce noise pollution.

Delivery

Estimated Delivery

15-30 Days

If you are planning on ordering tyres with these wheels then please check the delivery timescale for the specified tyres shown.


Require further assistance regarding estimated delivery dates?

Give us a Call

01274 936040

9am-6pm Mon-Fri & 9am-5pm Sat

Tyre Pressure Monitoring System

TPMS is a built-in monitoring system for the tyre pressure in motor vehicles. Automatic and direct indication as a warning on the display when a problem occurs in one or more tyres due to a pressure loss.

Having TPMS fitted improves the safety of a vehicle by monitoring and reporting low or over-inflated tyres, reducing the chances of a blowout. In addition to this, having correctly inflated tyres increases the life of the tyre and can help improve fuel efficiency.

All vehicles fitted with TPMS, registered after 1st January 2012 will require the TPMS to be tested as part of the MOT. This means, if your vehicle falls into this category, missing sensors could result in a fail on the MOT test.

LK Performance has the tools, diagnostic equipment, and expertise to ensure your TPMS are fitted correctly

Call us to order

Telephone: 01274936040

Sign up to all of our latest news, offers and updates!

LK Performance Ltd is a credit broker, not a lender and is authorised and regulated by the Financial Conduct Authority (FRN 670680). We do not charge you for credit broking services. We will introduce you to Finance available from a number of our partner lenders.

  • Copyright © 2024 LK Performance Ltd. All Rights Reserved. VAT No. 943799565. Limited Company No. 06742290

Website by Brave Agency

Close
Your Vehicle

Set your vehicle so that we can automatically filter wheels that will fit your vehicle as you browse our website.

Set Vehicle